Change to Ukrainian interface versionChange to English interface versionChange to Russian interface versionHome pageClear last query resultsHelp page
Search for specific termsBrowse by subject categoryBrowse alphabetical list of titlesBrowse by organizationBrowse special topic issues

close this bookElectrical Machines - Basic Vocational Knowledge (IBE - Deutschland; 144 pages)
View the documentIntroduction
Open this folder and view contents1. General information about electrical machines
Open this folder and view contents2. Basic principles
close this folder3. Execution of rotating electrical machines
View the document3.1. Size
close this folder3.2. Designs
View the document3.2.1. Definition
View the document3.2.2. Designation
Open this folder and view contents3.3. Degree of protection
Open this folder and view contents3.4. Cooling
Open this folder and view contents3.5. Mode of operation
View the document3.6. Heat resistance categories
Open this folder and view contents3.7. Connection designations of electrical machines
Open this folder and view contents3.8. Rotating electrical machines in rotational sense
View the document3.9. Rating plate
Open this folder and view contents4. Synchronous machines
Open this folder and view contents5. Asynchronous motors
Open this folder and view contents6. Direct current machines
Open this folder and view contents7. Single-phase alternating current motors
Open this folder and view contents8. Transformer
 

3.2.1. Definition

It must be possible to set up the machine as a unit resp. prime mover. This presupposes differing external constructions in order, thereby, to facilitate a coupling between electrical machine, work units or prime mover.


Figure 25 - Designs

(1) Foot machine with end shield
(2) Machine without feet with end shield flange
We comprehend design as the arrangement of machine elements in regard of holding elements, the position of bearings and shaft ends.
to previous section to next section

[Ukrainian]  [English]  [Russian]